Skip to content

Auto-reconnection

Auto-Reconnection of an URL

1) If the IP camera auto-reconnection is enabled (default setting):

  • when the connection is lost, the OnDeviceReconnecting event occurs and the RTSP filter tries to reconnect to the IP camera

  • when the camera is connected again, the OnDeviceReconnected event occurs

2) If the IP camera autoreconnection is disabled:

  • when the connection is lost, the OnDeviceLost event occurs and TVideoGrabber stops.

To disable the auto-reconnection, add:

autoreconnect=0

at the end of the URL, e.g.:

VideoGrabber.IPCameraURL = "rtsp://192.168.5.1/live.sdp>autoreconnect=0"